Split belly pan

[Teth-Air]

So just wondering how many AXYS have the plastic split where the bumper bolts go through? On the old Pro these were rivets and I was happy to see bolts this year but mine and my friends are both split. It looks like they were over tightened or that the bolt should have had a shoulder on it.

 

[907riders.com]

Picture?

 

[Indy_500]

Mine are not split at all, but I was surprised how tight they where.

 

[Teth-Air]

Picture?

Sorry, I am at work and sled is at home. I would like others to pop off their hood and take a look where the screws attach the front part of the bumper to the belly pan and report condition.

Chris

 

[ripnit]

Noticed this also...at the time I thinking it was just pulled/stretched but ill double check

 

[bailer]

Checked mine, no sign of cracked plastic.

 

[damx]

Mine are all good.

 

[Sage Crusher]

Pulled mine to install the extreme skid plate / all looked fine with no issues..

S/C

 

[Sheetmetalfab]

Mine is good.

 

[Dootimes2]

Mine is cracked on both sides, but wife's is fine. Dealer has a new one on the way.http://www.snowest.com/forum/attachment.php?attachmentid=258053&d=1445182676

 

[FCR112]

Split on one side good on the other...

 

[snowmobiler]

its hard to find good robot employees

 

[jhurkot]

its hard to find good robot employees

Not if you build them in Mexico.

 

[907riders.com]

Good on my rig.. Issues with dirt in the paint and belly pan gaps....