2019 600 alpha no revers

[dunatyk]

Has anyone else had an Alpha that won’t go into reverse? Sometimes I get a shift alarm when pushing the reverse button but the sled will not go into reverse. I’ve swapped the handle bar control unit and tried a different hood and still nothing. Hoping someone else has seen this problem and has a solution

 

[Ol* Geezer]

If it is idling too fast or the temperature is too high they won't go into reverse.

 

[dunatyk]

I’ll check temp, I know idle is good

 

[dunatyk]

Temp reading is normal

 

[Old & slow]

What RPM is the idle at?

 

[dunatyk]

It idles at 1450-1500

 

[kiliki]

did you have a reflash of the ecu at any point?

 

[zl5600]

It idles at 1450-1500

That is a little low. Should be 17-1800 RPM.

 

[gp800]

did you have a reflash of the ecu at any point?

It has been flashed once for a mid range bog. Done by the guys in Island Park.

 

[IDspud]

Interesting
We’ve got a 14 6000 that loves to die mystery deaths in island park, then runs fine an hour later. Never done it anywhere else.

 

[kiliki]

It has been flashed once for a mid range bog. Done by the guys in Island Park.

did it start the no reveres problem after this? I know cat did a map programming tree change between 2019 and 2020 as all the guys doing ecu "tunes" had this problem.

 

[gp800]

did it start the no reveres problem after this? I know cat did a map programming tree change between 2019 and 2020 as all the guys doing ecu "tunes" had this problem.

No the issue was present prior to the reflash.