C
My first problem was the machine had no power because the fuse fell out, yes, somehow it fell out. So I stuck it back in and hooked up the battery for a second and found I had power. I then let it sit for a week before coming back to it to hook everything up and go shred. But now the fuse keeps blowing.
I've tried diagnosing the problem by unplugging everything and hooking up the battery, but still 'pop' goes the fuse.
I have a wiring diagram and a multi-meter but I am still having a hard time with this.
I have unwrapped portions of the wiring harness and I have found no problems yet, seems like the next step is going to be pulling the tank off.
Any suggestions anyone?
(2013 m1100)
I've tried diagnosing the problem by unplugging everything and hooking up the battery, but still 'pop' goes the fuse.
I have a wiring diagram and a multi-meter but I am still having a hard time with this.
I have unwrapped portions of the wiring harness and I have found no problems yet, seems like the next step is going to be pulling the tank off.
Any suggestions anyone?
(2013 m1100)