B
How many sled lengths can I expect over stock if I add a SLP pipe and can on my 06 600 RMK? Is it worth the money?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Brad, yes it's worth it!!!! here is my setup with the SLP pipe on my 07 600 RMK 155. 300 mains, needle in the middle clip, fuel screws (white plastic screws on the carbs) 1/2 to 3/4 turn from fully in, stock pilots, 10-58 weights with almond primary spring, stock helix in secondary with red/pink spring and three delrin washers (one on each end of the spring and one on the backside of the cup). You will not be dissapointed, I ride the same elevations as I from eastern washington.
Thanks for the good info! I just have a SLP can and Reeds on the wifes 06 600 do you think I will gain much with the pipe?