• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

SLP clutch kit on the 24 boost

Teth-Air

Well-known member
Lifetime Membership
Premium Member
Nov 27, 2007
4,561
2,790
113
Calgary AB/Nelson BC
www.specified.ca
Seen this a few times years ago. One buddy was gearing down. Another buddy, with exact same sled and thought he knew everything and worked at a cat dealership, said he was crazy. The geared down sled blew his doors off. Those were na sleds. If anything can take advantage of being geared up it would be boosted since they shine under a load. Depends on where you're at to start with I'm guessing.
Exactly, if it is clutched so the motor is not loaded and you gear up you may actually gain track speed but if you gear down first and then load the motor with proper cluthcing you will be way ahead.
 
R

Reddragon800

Well-known member
Feb 26, 2013
266
407
63
I would like to jump in on this conversation.

I think understanding what gearing is in each sled and what that equates to in an efficient transfer of power will help. We can all agree the closer to 1-1 or exactly 1-1 is the most efficient way to transfer power on a CVT system. I attached a chart that illustrates the shift points and corresponding track speeds in each 1/10 of a shift and what is needed to achieve 1-1.

The Boost makes good power but the clutching is horrible and the gearing IS TOO HIGH. Achieving 1-1 or 120KM/h track speed in a climb in fresh snow will NEVER happen. On a trail or poaching a track it will, but not in fresh snow.

With Correct clutching and gearing and more power you can achieve 1-1.

Polaris 850 Matryx Stock clutching
Boost QD2Kurts GeardownSkidoo 850T
22/50 - 145KMH29/69 - 139KMH21/53- 122KMH
2.27 ratio2.38 ratio2.52 ratio
1-1= 120KMH1-1 =115KMH1-1 = 101KMPH
8500 RPM8500 RPM8000 RPM
Belt pressure lbsShift location
654​
0​
0​
0​
0​
621​
594​
0.1​
13.18​
12.64​
11.09​
571​
550​
0.2​
26.36​
25.28​
22.19​
530​
513​
0.3​
39.54​
37.92​
33.28​
497​
483​
0.4​
52.72​
50.56​
44.37​
470​
458​
0.5​
65.9​
63.2​
55.46​
446​
436​
0.6​
79.08​
75.84​
66.55​
427​
418​
0.7​
92.26​
88.48​
77.64​
411​
403​
0.8​
105.44​
101.12​
88.73​
397​
391​
0.9​
118.62​
113.76​
99.82​
385​
1-1 Shift1-1 Shift1-1 Shift
380​
1​
131.8​
126.4​
110.91​
375​
Half overdriveHalf overdriveHalf overdrive
370​
1.1​
145​
139​
122​
Full Over DriveFull Over DriveFull Over Drive

I attached 2 photos. One of a boost with a 10hp tune, geared right, clutched right - full shift, Second is a axys 850 with a boondocker sidekick turbo with bad gearing and clutching - barely getting half shift.

Lots to think about here, but allows to understand how much tracks speed and power is required to get these sleds to perform there absolute best.

IMG_0853.jpeg IMG_0854.jpeg
 

Teth-Air

Well-known member
Lifetime Membership
Premium Member
Nov 27, 2007
4,561
2,790
113
Calgary AB/Nelson BC
www.specified.ca
Thank you for taking the time to show the numbers to prove what you are saying. Unfortunately you will be met with "that guy" who says he has always geared up his turbos to load the motor and get way more track speed. He won't be able to prove anything only tell you that you know nothing and he has more experience because he has always done it that way.

Don't listen to him as there are many who silently appreciate it.
 
Last edited:

Tjtwenty

Well-known member
Lifetime Membership
Oct 10, 2016
56
69
18
I would like to jump in on this conversation.

I think understanding what gearing is in each sled and what that equates to in an efficient transfer of power will help. We can all agree the closer to 1-1 or exactly 1-1 is the most efficient way to transfer power on a CVT system. I attached a chart that illustrates the shift points and corresponding track speeds in each 1/10 of a shift and what is needed to achieve 1-1.

The Boost makes good power but the clutching is horrible and the gearing IS TOO HIGH. Achieving 1-1 or 120KM/h track speed in a climb in fresh snow will NEVER happen. On a trail or poaching a track it will, but not in fresh snow.

With Correct clutching and gearing and more power you can achieve 1-1.

Polaris 850 Matryx Stock clutching
Boost QD2Kurts GeardownSkidoo 850T
22/50 - 145KMH29/69 - 139KMH21/53- 122KMH
2.27 ratio2.38 ratio2.52 ratio
1-1= 120KMH1-1 =115KMH1-1 = 101KMPH
8500 RPM8500 RPM8000 RPM
Belt pressure lbsShift location
654​
0​
0​
0​
0​
621​
594​
0.1​
13.18​
12.64​
11.09​
571​
550​
0.2​
26.36​
25.28​
22.19​
530​
513​
0.3​
39.54​
37.92​
33.28​
497​
483​
0.4​
52.72​
50.56​
44.37​
470​
458​
0.5​
65.9​
63.2​
55.46​
446​
436​
0.6​
79.08​
75.84​
66.55​
427​
418​
0.7​
92.26​
88.48​
77.64​
411​
403​
0.8​
105.44​
101.12​
88.73​
397​
391​
0.9​
118.62​
113.76​
99.82​
385​
1-1 Shift1-1 Shift1-1 Shift
380​
1​
131.8​
126.4​
110.91​
375​
Half overdriveHalf overdriveHalf overdrive
370​
1.1​
145​
139​
122​
Full Over DriveFull Over DriveFull Over Drive

I attached 2 photos. One of a boost with a 10hp tune, geared right, clutched right - full shift, Second is a axys 850 with a boondocker sidekick turbo with bad gearing and clutching - barely getting half shift.

Lots to think about here, but allows to understand how much tracks speed and power is required to get these sleds to perform there absolute best.
If I put a Kurt's gear down on my boost, how would I need to change my clutching? I have a 23 boost with a vohk 91 tune and their clutching
 

duncan76

Well-known member
Lifetime Membership
Aug 16, 2013
422
466
63
central 509
Stop bickering and get a sled with equal weight riders and one geared down and one with stock gearing or geared up and pull same hill same time in 2ft of fresh or more especially if theres obstacles that you have to work around ya know like anything but wide open bowls and see who wins. My money is on geared down go ahead ask me how I know.
 
Premium Features