shock wave helix

[MX877]

i just picked up a 09 xp that has a shock wave helix, the pins in the primary are 15.4 grams. i am not sure about the ramps, i forgot to look. my question is what are stock pin weights and ramps, would it be ok to run this helix if i put the primary back to stock?
with that being said i have another primary that has 12.1 pins an 144 ramps is that stock?

 

[winter brew]

stock in 09 was 441 ramps, 200/320 primary spring.
Your shockwave can be adjusted to work with just about anything. Stock '09 Primary setup with the S/W set at about 42*, adjust pin weight to run on clicker 3-4 is a good starting point.