N
I'm sure the info is on this forum somewhere but can someone tell me what the torque specs are for the primary and secondary clutch bolts on an 06 900 fusion?
900 fusion clutch bolt torque
- Thread starter Not sponsored
- Start date
S
http://www.hardcoresledder.com/foru...1-a.html#/forumsite/20508/topics/63124?page=1
The RMK is 96 ft lbs-primary and I want to say 13 ft lbs- secondary. The thread I posted above has fusion info that might help, not sure if they are different.
The RMK is 96 ft lbs-primary and I want to say 13 ft lbs- secondary. The thread I posted above has fusion info that might help, not sure if they are different.
N
Thanks
Wrong!!!
96 was the dealers thinking this will keep the clutch from coming off when all it's doing is stretching the bolt.
70ft lbs is plenty!!!!! Torque it to 70, let it idle for a while..re-torque to 70 again..do a quick ride like 10mins and re-torque again..I promise u this is exactly what Indydan will tell u, started this procedure in 2008, never an issue since..secondary is 12ft lbs
Sent from my iPhone using Tapatalk
96 was the dealers thinking this will keep the clutch from coming off when all it's doing is stretching the bolt.
70ft lbs is plenty!!!!! Torque it to 70, let it idle for a while..re-torque to 70 again..do a quick ride like 10mins and re-torque again..I promise u this is exactly what Indydan will tell u, started this procedure in 2008, never an issue since..secondary is 12ft lbs
Sent from my iPhone using Tapatalk
Similar threads
