Pro rmk turbo removal won't start!

schmidty89 · Jan 10, 2015

Working on a buddies 12 PRO800. Had a silber turbo. Taking back to stock. Have everything reassembled and it will not start. Seems to be loading up. Lots of excess fuel. When plugs are removed you can see it fuming out.

We did add v force reeds while everything was torn down.
We Have siphoned the old fuel.
New plugs with food spark!

Any clues?

Injector?
Did we miss a wire?

Sent from my iPhone using Tapatalk

diamonddave · Jan 10, 2015

What year was the Silber kit? Did it have the Bully Dog? If it was a '14 or '15 with Bully Dog, then it's going to have the larger 1000cc injectors and the ECU will be flashed. Both would need to go back to stock.

If it is a turbo kit from '13 or earlier with secondary injectors, then the above info is moot.

schmidty89 · Jan 10, 2015

No I believe he purchased it used in '13 so it was probably a '12 kit. Never sent the ECU in. Thanks though

Sent from my iPhone using Tapatalk

schmidty89 · Jan 10, 2015

It seems like it will burn for a while.

Sent from my iPhone using Tapatalk

AKFULLTHROTTLE · Jan 12, 2015

Hard to say without knowing if you got everything pulled out or not. Secondary injectors, All of the wiring harness.... Did you hook the stock map sensor back up????

die hard poo · Jan 12, 2015

If they are the new VF3R reeds, they maybe causing it to load up. There is a thread in the pro-ride section discussing this. Try putting stock reeds in and see if it runs.

schmidty89 · Jan 12, 2015

Thanks guys I'll be sure to pass this info along. He ended up tearing down the top end and his hugs and Pistons were scored. Got lucky and found a set in stock!

Sent from my iPhone using Tapatalk

Oregonsledder · Jan 12, 2015

Check to see if the pipe is full of gas. Take it off and dump it. A flooded sled can fill a pipe pretty fast and they will not start.

TRS · Jan 13, 2015

Are the injectors leaking? How long has it been sitting? Have the injectors cleaned and flow tested. Check the injector harness also.

skippy · Jan 13, 2015

Check to make sure the fuel pressure regulator is reinstalled on the fuel pump inside the tank. I chased my tail for hours ...

108snowbandit · Jan 14, 2015

Which map sensor is back in the blue silver or the stock?

Sent from my iPhone using Tapatalk

Search

Pro rmk turbo removal won't start!

schmidty89

Member

diamonddave

Chilly’s Mentor

schmidty89

Member

schmidty89

Member

AKFULLTHROTTLE

Well-known member

die hard poo

Well-known member

schmidty89

Member

Oregonsledder

Well-known member

TRS

Life Member

skippy

Well-known member

108snowbandit

Member

Similar threads