Upgraded Steering Stem Bushings

[Switchback06]

Is there a company that makes aftermarket steering bushings for Matryx? I have a set on my 2019 Axys sled, not sure if the posts are the same.

Any thougths?

 

[Mxracer39]

I had a set from OFT on my ‘21 Axys and I put them on my Matryx, they fit fine. Not sure if OFT makes them anymore or what company’s do, but I will say the same bushings fit from my Axys to my Matryx.

 

[Teth-Air]

They are the same. If slop is the problem you just need to file the aluminum spacers down so the bolts clamp tighter.

 

[Winshady]

Exactly. What’s with the bars moving around so much? Like their throttle block theory- if it’s sloppy it must be perfect…

 

[Teth-Air]

Exactly. What’s with the bars moving around so much? Like their throttle block theory- if it’s sloppy it must be perfect…

They actually don't move much when new but get sloppy pretty quick. Once the aluminum spacers are filed they do stay tight for a long time.

 

[gtwitch]

Like said above, file the spacer and then put a small amount of moly grease on shaft when you put it back together, should be good for a couple of years !!!
gtwitch in wyoming