Rode my (wife's) xm for little will about 6 weeks ago and got sick of it.
Came home and copied the boards off and then started figuring things out.
I got the boards a little higher than 2" higher and a total width of 28.75" on Parr with a axys.
After a lot of head scratching and assessing I finally cut the panels in half, trimmed them down and welded them back together. Refit the belly pans and modified them, built some covers for the back. Pretty crud but I'll make sure it works before I get to picky.
I'm sure this thing will be 10x the sled it was!
Came home and copied the boards off and then started figuring things out.
I got the boards a little higher than 2" higher and a total width of 28.75" on Parr with a axys.
After a lot of head scratching and assessing I finally cut the panels in half, trimmed them down and welded them back together. Refit the belly pans and modified them, built some covers for the back. Pretty crud but I'll make sure it works before I get to picky.
I'm sure this thing will be 10x the sled it was!