Opinion on '15 w/ TEAM clutching setup

[Linksvu]

Here's what I'm running:
- TEAM primary with SSI green spring and adjustable weights
- TEAM tied with 71-55/57 .36 helix, in 55 position, and black/purple spring
- 084 belt

800, 153 3" PC, all else stock, riding 9,000+

See anything not matching up here for optimum performance?

 

[knifedge]

maybe somewhat unrelated, but 083 belt is cheaper and seems to run better and last longer...

 

[knifedge]

--If running 7 tooth with 3 inch, you should be geared at least 20 / 49 or 19/50 , 8 tooth

--

 

[Linksvu]

maybe somewhat unrelated, but 083 belt is cheaper and seems to run better and last longer...

I've heard the opposite about 083 wear. Normally I run XTX belts anyhow.

How much difference will the gearing change be?

 

[Linksvu]

Any thoughts as to why these setup seems to flatten the power from 5500-6500? From engagement to about 6000, the response is great, and again from about 6500 to 8100. But between about 5500 and 6500 the power seems really flat.

Also, I swear this is not releasing as it should. Any thoughts on how to improve back shift?