Since I have a Build (in my sig) of my RMK 900 , my wife wanted to get a thread of her sled to show everyone...
Its been a GREAT sled..NOT a single issue with the sled i have had in 2 years..except for those that i have caused..
--i ramped it off the tilt trailer on the roof of my truck and it landed upside down on the ground
--busted both front motor mount bolts in the engine due to my stupidity
--every time i break something on my sled, i part out hers
Overall, it is an absolutely GREAT SLED..the power is excellent, and she can smoke most 700s and some 800s out there.... its very reliable, and has ever mod to make it last even longer...
Here is my list of parts on the sled..and where you can find them if you are interested..if they are not OEM parts!
Venting
•MoFlow Dash Vent Kit (www.Moflowvents.com)
•Mountain Fit Hoods, Side Panel Vent kit (http://stores.homestead.com/williammoore/StoreFront.bok)
•Mountain Fit Hoods, Shock Vent kit (http://stores.homestead.com/williammoore/StoreFront.bok)
•LongTracksEdge Lower Side Panel Vents
BODY
•SPG Seat Post (www.sledsolutions.com)
•RED Powder Coated 09 Front Bumper (done by myslef)
•09 IQ Front End Conversion (www.FTXMotorsports.com)
•09 OEM Skid Plate
•Black Powder Coated Engine Support Braces (done by myself)
•RED Powder Coated Recoil Housing (done by myself)
•Black Powder Coated Better Boards (www.snowmobilebetterboards.com)
•BLACK w/Flame IQ Windscreen
•RED Polaris handguards with OEM mounts
•Fastlane Hood Strap Kit (www.Flaneinc.com)
•Pro-Armor Tether Cord
•Dzus Fastner Kit for Side Panels
•Billet Pull Handle (www.Ebay.com)
•Gripper Skis
•HOLZ Gas Rack
•PowerMadd Extended Brake Lever (http://www.parkeryamaha.com/powermad...orpolaris.aspx)
•Polaris Underseat Bag
•Skinz Knee Console Pads (www.skinzprotectivegear.com)
•IQ Center Fog Light Beam
Engine
•Custom 06 RED Billet Chaincase Cover (Polzinhunter on forum)
•’06 Rear Motor Mounts
•CompFusion Front Motor Mounts (CompFusion on forum)
•SLP Push Arm (www.startinglineproducts.com)
•SLP Torque Arm (www.startinglineproducts.com)
•06 SLP Pipe (www.startinglineproducts.com)
•06 SLP Y-Pipe (www.startinglineproducts.com)
•MBRP Racing Stinger Can (www.MBRP.com)
•FBF Throttle/Oiler Cable (FatBoyzFrenchy on forum)
•BoonDockers Control Box (www.Boondockers.com)
•HYVO 19/42 Gears
•Royal Purple ATF Chaincase Fluid
•Updated TPS Wiring Harness
•Armor Cord Heavy Duty Pull Rope (www.Armorcord.com)
•FNI Intake (www. Firenice.us)
•RED Powder Coated Belt Cover (done by myself)
•Electric Start Kit (needs installed)
Suspension
•Fox Floats Front Shocks (www.Foxracingshox.com)
•BLACK Fox Float Roost Guards (www.Foxracingshox.com)
•RYDE FX Rear Track Shock
•RYDE FX Front Track Shock
•225lb Front Track Spring
•MMP Freedom Axle (www.Mountainmachines.us)
•MountainAddiction 8” Billet Big Wheel Kit (www.MountainAddiction.com)
•HOLZ 41” Wide A-Arms (www.Holzracingproducts.com)
•HOLZ Black Billet Spindles (www.Holzracingproducts.com)
•HOLZ Billet Tie-Rods
•Polaris Billet Rail Brace
•07-up IQ Steering Boot Covers
•Ice Scratchers (SummitSeeker on forum)
•159” Series IV Track 2.4” Paddles
Clutching
•Team TSS-98 Secondary
•64/42.46 Twin Trax Helix
•2 Derlin Washers in Secondary
•Black/Red or Red/Pink Secondary Spring
•3211115 Drive Belt
•Balanced P-85 Drive Clutch
•10-68g MTX Weights
•Black/Green Primary Spring
•RED Powder Coated Primary Cover (done by myself)
•RED Powder Coated Secondary Cover (done by myself)
MISC
•Warm-up Stand (www.Easymovecarts.com)
•EZ Sled Lift (www.Easymovecarts.com)
•SLP Clutch Press Tool for Primary/Secondary (www.startinglineproducts.com)
•SLP Clutch Holding Tool (www.startinglineproducts.com)
Wish List
•Custom UHMW Side Panel “RMK 700” (Polzinhunter on forum)
•AMP Billet Gas Cap
•Billet Idler Wheels
•09 sway bar setup
•ZBROZ sway bar bracket for 09 sway bar
•SLP Cylinder Porting with Decompression Hole Plugging
•2poor Rear Motor Mounts, Torque Arm Assembly
•Timbersled sway bar block off plate
•Anti-Stab Kit
•Anti-Rachet Drivers
•Fully Clipped Track
•Heavy Duty Torsion Springs .377/47 degree
•Rebuilt Stator
•Updated 32mm Crankshaft
•Torque Master I Crank Modification
•Black Powder Coated Skid
•SPG RED Powder Coated Rear Bumper
•Innovative AF Gauge
Its been a GREAT sled..NOT a single issue with the sled i have had in 2 years..except for those that i have caused..
--i ramped it off the tilt trailer on the roof of my truck and it landed upside down on the ground
--busted both front motor mount bolts in the engine due to my stupidity
--every time i break something on my sled, i part out hers
Overall, it is an absolutely GREAT SLED..the power is excellent, and she can smoke most 700s and some 800s out there.... its very reliable, and has ever mod to make it last even longer...
Here is my list of parts on the sled..and where you can find them if you are interested..if they are not OEM parts!
Venting
•MoFlow Dash Vent Kit (www.Moflowvents.com)
•Mountain Fit Hoods, Side Panel Vent kit (http://stores.homestead.com/williammoore/StoreFront.bok)
•Mountain Fit Hoods, Shock Vent kit (http://stores.homestead.com/williammoore/StoreFront.bok)
•LongTracksEdge Lower Side Panel Vents
BODY
•SPG Seat Post (www.sledsolutions.com)
•RED Powder Coated 09 Front Bumper (done by myslef)
•09 IQ Front End Conversion (www.FTXMotorsports.com)
•09 OEM Skid Plate
•Black Powder Coated Engine Support Braces (done by myself)
•RED Powder Coated Recoil Housing (done by myself)
•Black Powder Coated Better Boards (www.snowmobilebetterboards.com)
•BLACK w/Flame IQ Windscreen
•RED Polaris handguards with OEM mounts
•Fastlane Hood Strap Kit (www.Flaneinc.com)
•Pro-Armor Tether Cord
•Dzus Fastner Kit for Side Panels
•Billet Pull Handle (www.Ebay.com)
•Gripper Skis
•HOLZ Gas Rack
•PowerMadd Extended Brake Lever (http://www.parkeryamaha.com/powermad...orpolaris.aspx)
•Polaris Underseat Bag
•Skinz Knee Console Pads (www.skinzprotectivegear.com)
•IQ Center Fog Light Beam
Engine
•Custom 06 RED Billet Chaincase Cover (Polzinhunter on forum)
•’06 Rear Motor Mounts
•CompFusion Front Motor Mounts (CompFusion on forum)
•SLP Push Arm (www.startinglineproducts.com)
•SLP Torque Arm (www.startinglineproducts.com)
•06 SLP Pipe (www.startinglineproducts.com)
•06 SLP Y-Pipe (www.startinglineproducts.com)
•MBRP Racing Stinger Can (www.MBRP.com)
•FBF Throttle/Oiler Cable (FatBoyzFrenchy on forum)
•BoonDockers Control Box (www.Boondockers.com)
•HYVO 19/42 Gears
•Royal Purple ATF Chaincase Fluid
•Updated TPS Wiring Harness
•Armor Cord Heavy Duty Pull Rope (www.Armorcord.com)
•FNI Intake (www. Firenice.us)
•RED Powder Coated Belt Cover (done by myself)
•Electric Start Kit (needs installed)
Suspension
•Fox Floats Front Shocks (www.Foxracingshox.com)
•BLACK Fox Float Roost Guards (www.Foxracingshox.com)
•RYDE FX Rear Track Shock
•RYDE FX Front Track Shock
•225lb Front Track Spring
•MMP Freedom Axle (www.Mountainmachines.us)
•MountainAddiction 8” Billet Big Wheel Kit (www.MountainAddiction.com)
•HOLZ 41” Wide A-Arms (www.Holzracingproducts.com)
•HOLZ Black Billet Spindles (www.Holzracingproducts.com)
•HOLZ Billet Tie-Rods
•Polaris Billet Rail Brace
•07-up IQ Steering Boot Covers
•Ice Scratchers (SummitSeeker on forum)
•159” Series IV Track 2.4” Paddles
Clutching
•Team TSS-98 Secondary
•64/42.46 Twin Trax Helix
•2 Derlin Washers in Secondary
•Black/Red or Red/Pink Secondary Spring
•3211115 Drive Belt
•Balanced P-85 Drive Clutch
•10-68g MTX Weights
•Black/Green Primary Spring
•RED Powder Coated Primary Cover (done by myself)
•RED Powder Coated Secondary Cover (done by myself)
MISC
•Warm-up Stand (www.Easymovecarts.com)
•EZ Sled Lift (www.Easymovecarts.com)
•SLP Clutch Press Tool for Primary/Secondary (www.startinglineproducts.com)
•SLP Clutch Holding Tool (www.startinglineproducts.com)
Wish List
•Custom UHMW Side Panel “RMK 700” (Polzinhunter on forum)
•AMP Billet Gas Cap
•Billet Idler Wheels
•09 sway bar setup
•ZBROZ sway bar bracket for 09 sway bar
•SLP Cylinder Porting with Decompression Hole Plugging
•2poor Rear Motor Mounts, Torque Arm Assembly
•Timbersled sway bar block off plate
•Anti-Stab Kit
•Anti-Rachet Drivers
•Fully Clipped Track
•Heavy Duty Torsion Springs .377/47 degree
•Rebuilt Stator
•Updated 32mm Crankshaft
•Torque Master I Crank Modification
•Black Powder Coated Skid
•SPG RED Powder Coated Rear Bumper
•Innovative AF Gauge