A
New to me sled. Was running fine, drove into my garage. Wanted to setup temporarily for low elevation, went to Speedwerx and per their instruction I put a 42t upper pulley on, drained 91 fuel, added 110. In addition installed new spark plugs gapped to 0.020". Now won't start. Had very short pop on second rope, then nothing. Getting spark, checked plugs, getting fuel. Thought possibly flooded, pulled plugs and roped, small fire in pipe. Installed old plugs that I knew worked. Nothing. Let sit over night thinking what it could be. First pull this morning popped a little, then nothing. I'm at 1000' elevation.