hey guys im looking for clutching and gearing recomendations, i have an 02 800 edge, 159 track, slp single, vforce reads, slp intake, flowrites, bored carbs, big wheel kit riding 5-10000 ft. i weight 185 lbs
clutching and gearing recomendations
- Thread starter ullose272
- Start date
anyone?
I had the exact same setup. 410-420 mains, needle in the middle or 1 slot up from the middle, fuel screws at 1.5 out.
19/43 gears, 140/320 SLP spring, 10-64's...maybe 62's up high. Team secondary... 54/38.46 red/black spring and 2 Delrin washers. If you still have the button clutch a 50/34 SLP MOUNTAIN cut helix and SLP black/grey spring set as loose tortionally as will give adequate backshift....probably the middle hole.
19/43 gears, 140/320 SLP spring, 10-64's...maybe 62's up high. Team secondary... 54/38.46 red/black spring and 2 Delrin washers. If you still have the button clutch a 50/34 SLP MOUNTAIN cut helix and SLP black/grey spring set as loose tortionally as will give adequate backshift....probably the middle hole.
thanks dude. i have the team clutch what elevation are you at?
I rode mainly 3-6K, but ran 10-66's and 430 mains...I adjusted for your higher altitude.
