checking offset on 900 polaris clutches

[river]

can I used straight edge to place on the back of the primary and measure to check off set on secondary? what is it suppose to be 5/8 of a inch at the front on secondary?anyone do it this way before? first measurement was at 7/8 so I took a washer off the back side of secondary until I got it a 5/8's and took some out of the front bolt so there would be a little play in the secondary Is this right? thanks

 

[Polarisrocks]

you have to measure to the outer sheeth on the secondary, thats the stationary sheeth. you can go to hrpmotorsports.com and look through his owners manual for the specs.

 

[river]

you have to measure to the outer sheeth on the secondary, thats the stationary sheeth. you can go to hrpmotorsports.com and look through his owners manual for the specs.

did a search there a could not find it?