C
Sled is 2011 800 etec summit everest. The sled will not show any signs of starting, and after pulling a plug and turning it over it seems to not be getting any spark.
We recently installed a 2014 Silber turbo kit on the sled, it has one ride since the install. Everything seemed to work fine on its last ride. Upon getting it back home, my father was checking the wiring of the fuel box and accidentially plugged the power wire for the fuel box into the reverse circuit instead of the auxiliary circuit. (Both plugs are behind the gauge cluster, and have the same style plug). He then started the sled and put it into reverse, it went into reverse and then died shortly after. Since then it will not start. We have tried putting it back to the correct configuration both with and without the fuel controller plugged in.
The sled also has the auxiliary engine temp module that plugs into the auxiliary plug behind the gauge. (shows engine temp on the oem gauge) Have also tried starting the sled without this plugged in, as well as without the other turbo accessories (oil pump and AFR gauge) plugged in. No luck
We have checked the 5 amp fuse located by the oil tank, and it was fine. Checked the D.E.S.S. key and it is connected, as well as many other connections.
Wondering what else could be causing this? I am leaning toward the reverse switch being bad, but really have no idea. Thoughts??
We recently installed a 2014 Silber turbo kit on the sled, it has one ride since the install. Everything seemed to work fine on its last ride. Upon getting it back home, my father was checking the wiring of the fuel box and accidentially plugged the power wire for the fuel box into the reverse circuit instead of the auxiliary circuit. (Both plugs are behind the gauge cluster, and have the same style plug). He then started the sled and put it into reverse, it went into reverse and then died shortly after. Since then it will not start. We have tried putting it back to the correct configuration both with and without the fuel controller plugged in.
The sled also has the auxiliary engine temp module that plugs into the auxiliary plug behind the gauge. (shows engine temp on the oem gauge) Have also tried starting the sled without this plugged in, as well as without the other turbo accessories (oil pump and AFR gauge) plugged in. No luck
We have checked the 5 amp fuse located by the oil tank, and it was fine. Checked the D.E.S.S. key and it is connected, as well as many other connections.
Wondering what else could be causing this? I am leaning toward the reverse switch being bad, but really have no idea. Thoughts??