Thought you guys on the 4-stroke side of the world would like to see this as well....
----------------------------
Service Bulletin
Date: December 19, 2012
Product Line: Snowmobile
Bulletin No: BS201312
Subject: Slide Rail End Caps
Affected Models: 2013 M8, M 1100 Turbo, and M 1100 non-Turbo
NOTE: Refer to Cat Tracker Online to obtain the list of affected VIN’s from your inventory by selecting the “Service” tab, then the “Bulletin Display” tab. Specific criteria is required to be selected. Example: Bulletin Type-All, Product Type-SNOW, Bulletin Number BS201312 and Bulletin Year 2013.
Condition: The slide rail end caps do not meet Arctic Cat standards on the affected models only and should be replaced.
Solution: Install new Slide Rail End Cap Update Kit (p/n 0637-420). Instructions will be included in the kit.
Parts: Order an appropriate number of Slide Rail End Cap Update Kits (p/n 0637-420) through normal parts-ordering channels. Your dealership Parts Account will be billed and then credited upon receipt of a Warranty Claim Request.
Warranty: A labor allowance of 0.2 hr will be paid per affected snowmobile.
NOTE: It is required to enter the current mileage of each affected model.
! ATTENTION
To ensure that the necessary service work is completed in a timely manner and that this issue can be resolved, Arctic Cat is requesting that all service work be completed prior to December 19, 2013. All warranty claims directly related to this issue will not be honored after December 19, 2013, without prior approval.
----------------------------
Service Bulletin
Date: December 19, 2012
Product Line: Snowmobile
Bulletin No: BS201312
Subject: Slide Rail End Caps
Affected Models: 2013 M8, M 1100 Turbo, and M 1100 non-Turbo
NOTE: Refer to Cat Tracker Online to obtain the list of affected VIN’s from your inventory by selecting the “Service” tab, then the “Bulletin Display” tab. Specific criteria is required to be selected. Example: Bulletin Type-All, Product Type-SNOW, Bulletin Number BS201312 and Bulletin Year 2013.
Condition: The slide rail end caps do not meet Arctic Cat standards on the affected models only and should be replaced.
Solution: Install new Slide Rail End Cap Update Kit (p/n 0637-420). Instructions will be included in the kit.
Parts: Order an appropriate number of Slide Rail End Cap Update Kits (p/n 0637-420) through normal parts-ordering channels. Your dealership Parts Account will be billed and then credited upon receipt of a Warranty Claim Request.
Warranty: A labor allowance of 0.2 hr will be paid per affected snowmobile.
NOTE: It is required to enter the current mileage of each affected model.
! ATTENTION
To ensure that the necessary service work is completed in a timely manner and that this issue can be resolved, Arctic Cat is requesting that all service work be completed prior to December 19, 2013. All warranty claims directly related to this issue will not be honored after December 19, 2013, without prior approval.
Last edited by a moderator:
