Anti-slop bushings for Catalyst?

[MTN_VIPER]

My steering post bushings are getting pretty worn and there is a fair amount of play in the steering post. Not a huge deal, just kind of bugs me a bit.

Just wondering if someone is making anti-slop steering post bushings for the Catalyst, like BDX did for the Ascender chassis?

 

[frozenfarmer]

Is it the bushings? I think I need a new steering post as I have a bit dead play rotation. I had a hit that threw me off the sled when the ski caught, so that is my guess when it happened.

I had seen there were some failing the u-joint in the vertical part of the shaft.

 

[MTN_VIPER]

It appears to be in the bushings, it has quite a bit of side to side play as opposed to rotational play. First thought was maybe that the bolts that hold the bushing blocks to the chassis had came loose, but they are tight.

 

[rkm]

Most of them are too tight and barely loosen up in 1000 miles.

 

[Old & slow]

It appears to be in the bushings, it has quite a bit of side to side play as opposed to rotational play. First thought was maybe that the bolts that hold the bushing blocks to the chassis had came loose, but they are tight.

Mine is the same. side to side play is more noticeable than rotational neither is bad but I differently will be looking for new ones. I did snug up the bolts a bit and it helped but not the cure.