TRA 7 question

[Dirty E]

I just removed my primary to be sent to roosterbuilt and as far as I know the the insideface of the primary and shaft should just slide off, it wont come apart am I missing something or is there a trick to seperating the clutch, my guess would be I have more issues than I thought, Thanks. Erik

 

[sledsrock]

The TRA 7 does not have the splines that many are used to seeing, they went to a tapered shaft and now presses together. Once the clutch is removed from the crank, to split the clutch, simply take the clutch bolt or removal tool and thread into clutch approx. 1 inch and flip the clutch upside down so the bolt head is down and whack the bolt head on a hard surface while holding the clutch in your hands. Hope that make sense.

 

[Dirty E]

Got it worked great, i had tried tapping it with a hammer before but your idea did the trick. Erik