Torsion Spring Specification / Gen 5 Expert 165

[Sleds R Fun]

Does any one happen to have the Torsion Spring Specification for the stock Gen 5 /165 Expert X. (Different PN’s vs 2022, but are they actually different)
Part#’s 503196311 LH / 503196312 RH

 

[White Rad]

The stock torsions in my 165 g5 expert have a spring rate of 1.27 with an opening angle of 95. The g4 had the same 1.27 rate but with an opening angle of 80. I believe The larger opening angle on the g5 springs effectively reduces the pre load. With my jerry can and large tunnel bag my sled had 6in of sag sitting in the shop. Totally useless. I did 13% stiffer springs with an 80 angle and it was the single best improvement I made to my sled. Well other the hyvo’s after the China chain popped lol

 

[Sleds R Fun]

The stock torsions in my 165 g5 expert have a spring rate of 1.27 with an opening angle of 95. The g4 had the same 1.27 rate but with an opening angle of 80. I believe The larger opening angle on the g5 springs effectively reduces the pre load. With my jerry can and large tunnel bag my sled had 6in of sag sitting in the shop. Totally useless. I did 13% stiffer springs with an 80 angle and it was the single best improvement I made to my sled. Well other the hyvo’s after the China chain popped lol

Thank you! Where did you find the specs?

 

[White Rad]

They are painted right on the torsion springs by the part number