8
The first problem I'm having is that there is a bracket in the way for the qs3 chamber to clear. Instructions say the chamber needs to be mounted to the left. But right where the chamber should be positioned on the front arm there is a welded bracket on my 2018 hitting the qs3 chamber. Second thing I see is that the limiter strap in Fox's diagram is to the right of the sled it's dead center and held by the upper shock tabs and goes down dead center to the anti stab axle. I dont think this particular thing is preventing install but it doesnt look right according to the way fox shows it. Any help would be appreciated. Thanks in advance.
Last edited: