Want to pull my secondary off and clean, have never worked on a Team rapid reaction before, what do I need to know before I start ? This on an 09 800 Dragon.
Q- on team rapid reaction
- Thread starter ENDO1
- Start date
If all you want to do is clean it, you just pull out the helix (4 Torx screws) and blow it out with compressed air. Beyond that you will need the proper spring compresser.
S
The helix will come out and go back in easier if you back out the adjusting screw enough to take the side load off. If you count the turns out, you can set the ride height right back where it was.
Similar threads
