Hood screens, homemade?? any pics?

[wantler]

Hi Guys,

today I had a wonderful ride in Sunshine through deep powder!! when I came home and checked on the sled, I was surprised how filled up with snow, the engine compartment was!! I found already a lot of threads here about it, but does anybody has some pics of screens under and behind the light?? and is there anything else to do?

buy the way, my driving lights, taillight and break light still wont work!! have another thread about that one. help...

thanks.

 

[off trail mike]

Wantler:

On your lights, you need to replace the "Load control relay". On the 4 pack of relays up front by the ECU, its the one closest to the nose of the sled. My lights wouldn't come on for a while after I started the engine and then came on. This relay allows power to get to your lights.

Also, I have a black seat cover off of 2010 XTX. I don't need a Black/Red but PM me and we should be able to work something out.

Cheers,
Mike

 

[wantler]

Hi,

that load relay works!! That's my trouble. It energizes to wires after I start the engine. But there is no power on the fuse box and I don't know which colours the wire are (the red/white and yellow/green from the load relay getting energized) but from there the wire colour changes!

how much do you want for the seat cover?
thanks.