09 M8 gauge problem.

[Clarkee]

After a ride today I noticed my gauge cluster isn't working. Power at the gauge but no readout while riding. There is initial readout when u first start the sled for approx 3 seconds then screen goes blank. I have checked all connections and cleaned with dielectric cleaner. Anyone got any insight. Sled runs top
Notch without it but nice to monitor Rpms ect.

 

[hawktoy85]

I was having a lot of issues with my gauge too. I popped to plastic gauge cover off and unplugged the ribbon cable to the buttons and now it works fine. The buttons don't work obviously but you can use a small screwdriver to touch the pins where the ribbon cable attache to get the gauge to the display you like and then just leave it there. Worked fine for me.

 

[Clarkee]

Cool. I'll rip it apart and see if that works. Never fails, lots of little **** going wrong when u are thinking about selling.