06 Rev 151 - Simple Mod's

B

BC-XP

Member

Lifetime Membership

Nov 29, 2007

316

10

18

Kamloops

• Feb 20, 2008

• #1

So my buddy just bought a used 06 Rev 151. Bone Stock Except for MBRP Can.

So are there any simple mod's that give good bang for buck as far as clutch & Gearing? Ride Alpine 5,000 -7,000 ft.

Not looking for heads or motor mods, just simple adjustments or bolt on pull the cord and go type mods.

 

High Voltage

Well-known member

Lifetime Membership

Jan 30, 2003

2,532

3,183

113

Helena, MT

• Feb 20, 2008

• #2

Mine rans best 8000-8100rpm ,it comes with 440 jets.I droped to 430 and .25 inch reed spacers . Give Big John a call for new helex in secondary and reed spacers about $75 .Then your ready to rip. HV
Big John #612-718-3861

 

Q

quickdraw

Free Member

Nov 28, 2007

220

11

18

Island Park, Id

• Feb 21, 2008

• #3

High Voltage said:

Mine rans best 8000-8100rpm ,it comes with 440 jets.I droped to 430 and .25 inch reed spacers . Give Big John a call for new helex in secondary and reed spacers about $75 .Then your ready to rip. HV
Big John #612-718-3861

Click to expand...

I have A kit from BJ for my 06 that is for sale if you want it. I used for a week then went a different direction. Nice kit, it will stretch your arms on the low end.

HPS can workes great on the 06. Lose 12 lbs and gain some low end grunt.

 

M

Motley Doo

Free Member

Nov 26, 2007

2,071

84

48

Whitefish/Butte(college) MT

• Feb 21, 2008

• #4

Some flow-rites of other vents couldn't hurt!

 

R

revrider

Member

Lifetime Membership

Oct 26, 2003

114

17

18

Randle

• Feb 22, 2008

• #5

The 151's could use some gearing down from what I here.

 

T

TruckerBallZach

Member

Feb 24, 2008

179

6

18

Kalispell, Montana

• Feb 24, 2008

• #6

Get some quick clickers for your primary I adjust mine almost every time I ride depending on snow conditions theyre awesome! Also theres a little hole behind the secondary where the tunnel bends around, fill that with silicone to keep snow from seaping in.