Fellow 05-06 RMK/Fusion/Switchback 755/866 owners (700/900)
I offered to help a friend get some info out there to you all that have the above chassis..(other years are in the works as well)
These were a limited time/custom made motor mount setup…most commonly used on 975cc, 1140 cc Big Bores AND Turbo builds for the above chassis.
Most importantly, since there is NO aftermarket help on REAR motor mounts these are the way to go..they will tie the engine down and reduce engine vibration dramatically. There is also a FRONT Torque Arm Assembly (just like the SLP kit) if you would like to go that route as well, the arm will bolt just in front of the throttle bodies to the side of the bulkhead (this is a HUGE for those using electric start as you cannot use an SLP torque arm with the starter kit), but regardless if electric start is used or not, this is a great addition for support.
I prefer to have Compfusion front motor mount on my sleds and i personally would direct ANYONE to use his front mount setup..they are TOP NOTCH and he is an amazing guy that really loves to help out…(Colin is a GREAT GUY, and has a great product and I am in NO WAY trying to step on his front motor mount sales). I believe they are the BEST in the business that is way I am only promoting the REAR mounts…
The Rear motor mounts will be SOLD for $100 for the BRACTETS ONLY..unless we can get several people interested, then they can be $75/set or LESS!!!!
The rear motor mount kit will include…
--2 REAR motor mount brackets
--1 front torque arm bracket
I have a spreadsheet that has ALL the required hardware with POLARIS P/N’s that you can order from your local dealer (i.e. motor mounts, bolts, torque arm ect) ..and there will be an install sheet that will be emailed to you as well, or printed and mailed if that is preferred.
The rear mounts will NOT mount to the OEM housing, but will mount to the rear of the bulkhead instead.
I will be getting these mounts shortly and will I TRY and get them installed ASAPi n my 05 RMK 900 to verify install accuracy, but I know most will wait to install them in the summer.
If you are interested in getting the brackets, please reply to this post or send me a PM with everything you are interested in..whether its REAR mounts, or just the front torque arm. I will add you to the list and once we get a couple people in for sure, the brackets will be mass produced, payments can be made prior to shipment. Price depends on quantity wanted..the more ordered the cheaper they will be…but $100 will be the highest amount…
Below are the pics of the rear motor mounts mounted on engine cases and the front torque arm to give you an idea of the setup.
I offered to help a friend get some info out there to you all that have the above chassis..(other years are in the works as well)
These were a limited time/custom made motor mount setup…most commonly used on 975cc, 1140 cc Big Bores AND Turbo builds for the above chassis.
Most importantly, since there is NO aftermarket help on REAR motor mounts these are the way to go..they will tie the engine down and reduce engine vibration dramatically. There is also a FRONT Torque Arm Assembly (just like the SLP kit) if you would like to go that route as well, the arm will bolt just in front of the throttle bodies to the side of the bulkhead (this is a HUGE for those using electric start as you cannot use an SLP torque arm with the starter kit), but regardless if electric start is used or not, this is a great addition for support.
I prefer to have Compfusion front motor mount on my sleds and i personally would direct ANYONE to use his front mount setup..they are TOP NOTCH and he is an amazing guy that really loves to help out…(Colin is a GREAT GUY, and has a great product and I am in NO WAY trying to step on his front motor mount sales). I believe they are the BEST in the business that is way I am only promoting the REAR mounts…
The Rear motor mounts will be SOLD for $100 for the BRACTETS ONLY..unless we can get several people interested, then they can be $75/set or LESS!!!!
The rear motor mount kit will include…
--2 REAR motor mount brackets
--1 front torque arm bracket
I have a spreadsheet that has ALL the required hardware with POLARIS P/N’s that you can order from your local dealer (i.e. motor mounts, bolts, torque arm ect) ..and there will be an install sheet that will be emailed to you as well, or printed and mailed if that is preferred.
The rear mounts will NOT mount to the OEM housing, but will mount to the rear of the bulkhead instead.
I will be getting these mounts shortly and will I TRY and get them installed ASAPi n my 05 RMK 900 to verify install accuracy, but I know most will wait to install them in the summer.
If you are interested in getting the brackets, please reply to this post or send me a PM with everything you are interested in..whether its REAR mounts, or just the front torque arm. I will add you to the list and once we get a couple people in for sure, the brackets will be mass produced, payments can be made prior to shipment. Price depends on quantity wanted..the more ordered the cheaper they will be…but $100 will be the highest amount…
Below are the pics of the rear motor mounts mounted on engine cases and the front torque arm to give you an idea of the setup.
Last edited: