Turbo EFI motor options

[twsandrew]

What Efi motor is the easiest to drop in a IQR? Looking to buy a roller and build a turbo IQr mtn. I know Snowstar did the M1k. I was looking to see if I could do a D7 or D8 motor. Not familiar with IQRs other than Snowstars. What motors work and what is required? Thanks

 

[Silber]

6/7/800's cfi. There are a few members on this forum that have done it. Pm

Winter

or

1200psi

They have built some awsome iqr's.

 

[meathooker]

I did the 8. It is pretty easy to bolt the motor in...jet fuel did all of the wiring. 1200 makes motor plates; or the stock mounts work with relocating the mag side. Pipe isn't too bad to fit...still working on the charge tube.

 

[Snowstar]

Pretty straight forward install on the 7-8 cfi motors. Im helping a guy do a 700 cfi turbo in a 05 IQR. Ill be fitting the pipe next week. BTW my sleds for sale.

 

[Corey223]

I built an 07 IQr with 07 D7 cfi turbo. The sled turned out very well and is for sale this winter, loaded with the best suspension and go fast parts. PM me if anyone is interested.

 

[udlose]

IQR 700 CFI Turbo

700 Turbo