Silber reflash with stock components

[cdebodt44]

Just returned my Silber turbo Axys back to stock and need to get the machine to my dealer to flash it back to stock.

Is it okay to run the sled long enough to get on the truck with the turbo map in the ECU and stock components?

Thanks in advance if you have any experience with this.


Sent from my iPhone using Tapatalk

 

[Sheetmetalfab]

Just returned my Silber turbo Axys back to stock and need to get the machine to my dealer to flash it back to stock.

Is it okay to run the sled long enough to get on the truck with the turbo map in the ECU and stock components?

Thanks in advance if you have any experience with this.


Sent from my iPhone using Tapatalk

I have no experience with this but logic says the sled will run a little rich at worst.

 

[Dubaudi]

Mine would run and die when I tried to move it into the truck when the turbo was installed on a stock ECU. Just change to the MAP sensor from the turbo kit and it should run fine to move it. just be sure to put the stock one in before its tuned back to stock.