T
I took the rear skid off of my 04 xc sp (regular edge chassis) to PM it and put some heavier torsion springs. I took the aluminum block off where the rear mounting bolts go to get the new springs on. My black magic marker rubbed off so I lost the alignment when putting back together. I noticed a small hole in the splinned shaft so I thought it made since to line the gap in the aluminum block up with that hole. I can't for the life of me get the two rear mounting holes to line up to bolt the skid back in place.... I'm thinking the aluminum block needs to be moved a few tics to the left on the splinned shaft but I'm looking for some advice.
