proper hose routing help for Blow off valve

[bigpoppa05]

Anyone have any pictures as to the proper routing on the Blow off valve and intercooler reference lines. I was told factory hooked up a bunch wrong.

 

[KSH]

 

[joe_f7]

EVO's website has an update bulletin on the proper routing of it. Really easy and nice explanation.

http://evopowersports.com/

 

[Sage Crusher]

What is this last pic suppsed to be?

 

[KSH]

What is this last pic suppsed to be?

The bottom of the BRV solenoid as mounted.
When I have my hood off again I will get a better pic

 

[galljr13]

So it looks like the hose from the intercooler to the brv solenoid has been disconnect. What would this cause and should I be concerned about damage or power loss?

 

[Freshy]

So it looks like the hose from the intercooler to the brv solenoid has been disconnect. What would this cause and should I be concerned about damage or power loss?

You will not build any boost with this disconnected. It is common for this hose to come off. Try a better clamp.

 

[Jeff C]

You will not build any boost with this disconnected. It is common for this hose to come off. Try a better clamp.

Be careful with hose clamps. YOu need to find the right sized clamp.
If you use too big of one, as you tighten down the clamp the clamp get oblonged and will make for an air leak. I changed mine out and that is what happened.

I ended up getting rid of the gear clamps and using a pair of zip ties on each connection, being careful to getting small enough ones so as to make sure I did not end up oblonging the zip ties as well.

Holds tight and works great..............

 

[Sage Crusher]

Be careful with hose clamps. YOu need to find the right sized clamp.
If you use too big of one, as you tighten down the clamp the clamp get oblonged and will make for an air leak. I changed mine out and that is what happened.

I ended up getting rid of the gear clamps and using a pair of zip ties on each connection, being careful to getting small enough ones so as to make sure I did not end up oblonging the zip ties as well.

Holds tight and works great..............

Works like a champ !!

S/C

 

[Hilly]

Me too

Used smaller zip ties