Primary & Secondary Torque Specs??

[thump426er]

2007 M8 - trying to get my buddy's sled together and not having much luck with a search on here and only have 06 M7 manual.

Anybody out there have specs for the main primary clutch bolt? And for the driveshaft bolt on the brake rotor side? Thank you for any help.

 

[m8magicandmystery]

Torque Specifications
�� NOTE: STD refers to chain case drive models;
ACT refers to gear case drive models.
* w/Blue Loctite #243
** w/Green Loctite #609
***w/Green Loctite #620
ITEM TORQUE
Drive Clutch
(w/Oiled Threads - 1000 cc)
ft-lb
kg-m
55
7.6
Spider*** ft-lb
kg-m
250
34.5
Spider Retainer Nut*** ft-lb
kg-m
85
11.8
Drive Clutch Cover ft-lb
kg-m
10
1.4
Cam Arm Pin Lock Nut ft-lb
kg-m
10
1.4
Drive Clutch/Ring Gear Damper** ft-lb
kg-m
22
3.0
Driven Pulley* (STD) ft-lb
kg-m
24
3.3
Driven Pulley (ACT) ft-lb
kg-m
32
4.4
Driven Pulley Roller Plate (STD) ft-lb
kg-m
20
2.8
Torque Bracket (STD) ft-lb
kg-m
7.5
1.5
Chain Case Top Sprocket** ft-lb
kg-m
40
5.5
Chain Case Bottom Sprocket** (w/
Reverse)
ft-lb
kg-m
35
4.8
Chain Case Bottom Sprocket* (w/o
Reverse)
ft-lb
kg-m
35
4.8
Reverse Gear* (STD) ft-lb
kg-m
15
2.1
Chain Tensioner Arm* (STD) ft-lb
kg-m
8
1.1
Chain Case/Tunnel ft-lb
kg-m
15
2.1
Chain Case Cover ft-lb
kg-m
12-15
1.7-2.1
ITEM TORQUE
Chain Case Drain Plug ft-lb
kg-m
35
4.8
Shift Linkage Arm (STD) ft-lb
kg-m
25
3.5
Brake Caliper/Chain Case* ft-lb
kg-m
30
4.2
Flange Plate - STD (Lower) ft-lb
kg-m
15
2.1
Flange Plate - STD (Upper) ft-lb
kg-m
11
1.5
Torque Bracket Cover (ACT) ft-lb
kg-m
5.5
0.75
Movable Sheave (ACT) ft-lb
kg-m
5.5
0.75
Speedometer Sensor Bracket (ACT) ft-lb
kg-m
17
2.4
Gear Case/Chassis ft-lb
kg-m
20 (5/16-in.)
2.8
Brake Caliper Housing/Chassis
(ACT)
ft-lb
kg-m
20
2.8
Outside Caliper Housing/Inside Caliper
Housing (ACT)
ft-lb
kg-m
16.5
2.3
Gear Case Cover ft-lb
kg-m
11
1.5
Gear Case Drain Plug ft-lb
kg-m
30
4.2
Driveshaft/Output Shaft Cap Screw ft-lb
kg-m
70
9.7
Driveshaft/Brake Disc Retaining Nut
ft-lb
kg-m
120
16.6

 

[Nubulin]

I will answer you more directly.

Primary - 55ft lbs, losen and then retighten to 55ft lbs
Secondary - 32 ft lbs with blue locktite
Drive shaft bolt - 70 ft lbs with blue lloctite.
Brake disc retaining nut - 120 ft lbs and punch down in the recessed area with a center punch.

 

[thump426er]

Sweet, thank you both. Super appreciated.