PowerMadd Throttle cable extender

[volcano buster]

I am putting taller bars on the kids 440 and have a brand new throttle cable extender to use.

The instructions don't mention any sort of lubricant to be placed in the box before I seal it up. Should I run it dry or squirt some silicon lubricant in it to help keep it smooth and minimize plastic galling?

Thanks

 

[snosfun]

I just did one on my kids sled and it came with a little packet of grease.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

 

[meierjn]

Correct. I've seen a couple done and both had a small packet of lube included.

 

[Shattered1]

Just replaced my throttle extender and it came with lubricant as well.

If you misplaced the lube packet, you may want to try some white lithium grease. I used it in the old throttle extender for years and didn't have any problems. Ran it in -30 temps and it didn't stick or gum up.

 

[volcano buster]

Thanks.

This was a brand new package I just opened on the bench and didn't find a packet of lube. I have some silicone based grease, white lithium, spray silicon, etc. Just didn't want to use something that might get sticky over time or during colder events.