975 pistons for HTG
Where do you get pistons?
Who makes then?
Where do you get pistons?
Who makes then?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Don... before you get all excited... I'm pretty sure you cant buy them directly... and unless you have a 975 from Carls... they wont sell you them either....
HTG might and that would be your best place to try, IMO.
The 975 is more than just a piston and bore package....
What are you tryring to do?
Called HTG few times with no reply ... left message
I bought an used HTG 975 kit with cylinders / VES , gaskets , head, and reprogrammed CDI box.
So I need the pistons/rings,c clips, wrist pin.
Have yet to get kit so not sure if they need a renicasil.
Don,
don't know if you seen it but here are their hours and they are Eastern time zone
Store Hours: (EST)
Mon - Fri.
10 am - 5 pm
Saturday
10 am - 2 pm
The upper case also needs to be changed/machined on the 975. Atleast it does on the 06. Not sure about on the 05 since it only has 2 injectors.
-Nolan
Is it the same for 2005? 2005 needs to be machined?
yes the 05 has to be clearenced too. that is what rob told me before i did my 05, so i shipped him my upper case half. i think it has more to do with the bigger bore and the piston skirt hitting the case. he said it was a 15 minute job and he sent instructions with the kit on what to do incase i didn't want to send in my case. i said heck with that for the same money he might as well do it
the injector clearence issue is you have to put a couple of washer under the fuel rail to hold the injectors out a little bit so the piston skirt don't hit them.
Is there a way to get a copy of the instructions from you?
Out of curiosity did you check to see if Carl's has stock on the pistons?
Never know when I may need another set.
Talked to wiseco and they made two sizes 88 and 87 mm for 975.
Also they just made some 88.5 mm for the DRAGON RMK.
Another company also talking or talked to Wiseco about a piston of this size.
Not sure if ever made for Hot Seat Performance or HTG.
Minimum order for us to buy them from Wiseco 12 costing each $180 with rings, c clip, wrist pin.
Piston would be hard anozied
Skirt coating moly based is $12 per piston extra required for all runs you.
Runs are 12 , 24 , 50 and 100 pistons or more for price.
Takes 4 weeks to build.