Muffpot question
- Thread starter M8Chris
- Start date
J
jzillmer34
Member
The most common place is right where the Y pipe goes in to the pipe before the heat shield. You should be able to search on here and find pictures as I remember seeing some earlier this year. This is where I'm mounting mine also.
If you look in the 2010 M8 Lite Weight Can thread I have a picture of where I put mine, it does infact fit nicely over the y-pipe/pipe connection.
maby if you had a moffpot that had less hot dogs in it it would not be so big and ezer to mount
I hate to scratch up my new SLP pipe, but cant do without the muffpott. Is there anyway to mount it so it doesn't?
Hmm I always thought you were a hotdogger kind of guy chris!
Welcome to the team!
Welcome to the team!
Suck it up and mount it. You shouldn't be looking at the pipe any ways. If you are you most likely broke something. Pipe is for performance not looking at.
Put mine on the can right out of the box. toss in food at beginning of ride and eat well 3-4 hours later.
I know, but it is like a new sled and putting the first scratch on it.
1
1M800
Well-known member
Just got my MuffPot today and I am looking at where to mount it on my 09. My first thought was to mount it right after the Y pipe but it is all rounded there. I tried it but it doesn't seem to sit very good on the pipe (and it looks very close to the hood). It fit really well on my Super Q can, but I am wondering if it will get hot enough??? It is a ceramic coated can. I read on another thread something about cutting a notch out of the heat shield and mounting it there. Anyone have any other ideas or pics?
Muffpot Mounting
I run a stock pipe with a Speedwerx y-pipe,and an HPS silencer on my 08 M8 SnoPro.My Muffpot is mounted just after the y-pipe on the bend of the stock pipe. I am going to try to use two clamps to hold it in place. One wasn't enough. WAO runs two on his M7. One after the Y-pipe and one on his HPS silencer. Both work well but the one on the silencer definatly cooks at a lower temperature.
I run a stock pipe with a Speedwerx y-pipe,and an HPS silencer on my 08 M8 SnoPro.My Muffpot is mounted just after the y-pipe on the bend of the stock pipe. I am going to try to use two clamps to hold it in place. One wasn't enough. WAO runs two on his M7. One after the Y-pipe and one on his HPS silencer. Both work well but the one on the silencer definatly cooks at a lower temperature.
I have a 1M, so I know my motor fits differently. My Muffpot is right on my Y pipe, and that is perfect for cooking. You learn pretty quickly when you can put things on. Frozen burriotos...I start them right away when we take off. Trail running (for me, to get to the goods)..........takes much longer. But out when playing, I've learned on various things the amount of time it takes too cook. On the throttle a lot, takes less time.
I've never burnt any food. Lunch is in the Muffpot, and a lot of times I will put in something after lunch, for when we get back to the truck and be able to snack after loading.
My Muffpot is mounted with 2 clamps.
I've never burnt any food. Lunch is in the Muffpot, and a lot of times I will put in something after lunch, for when we get back to the truck and be able to snack after loading.
My Muffpot is mounted with 2 clamps.
so mounting it to the can will cook it. I have a mbrp can on my sled.
