Mountain Mod Mania's "Ultimate Ski Doo" Build in progress!

[04LS6]

So when can I drop my apex off for this type of rebuild?? lol...

 

[IRONMAN]

Had a chance to hop on this sled for a little rip on the weekend and it is as advertised! Stays flat on the small hills I pointed it up and pulled good, run clean. This is the best running 1200 PL doo I have seen,(was starting to wonder if any of them run clean) take your 1200 to Top Secret Shop. Kyle has these things working wicked, great sled Doc! Shame to cover up that carbon with decals though.

 

[RIP N TEAR]

Had a chance to hop on this sled for a little rip on the weekend and it is as advertised! Stays flat on the small hills I pointed it up and pulled good, run clean. This is the best running 1200 PL doo I have seen,(was starting to wonder if any of them run clean) take your 1200 to Top Secret Shop. Kyle has these things working wicked, great sled Doc! Shame to cover up that carbon with decals though.

I second that! Sled worked great and the topsecret shop has them dialed in.

 

[summit-x]

when are you guys going to post up pics of riding this weekend?

 

[Doc Zoom]

Here ya go! Man is this sled AWESOME! By far the coolest, fastest and lightest all wrapped up into one machine! Thanks to all the sponsors who helped make this sled happen, couldn't have do it without you!
This sled has the best of the best on it, and it shows!

Q-dog about messed himself when he took it for a rip last night, can't wait to see him pilot this hotrod and put it through its paces!

Ski-Doo is going to own the four stroke market in the next coming years with this new 1200. C3 Composites is the chassis of the future and Powderlite Turbo's are in a league of their own coupled with the Rapid Bike controller this sled is spot on!

Here are some pics of Kevin from C3 putting the "Ultimate Ski Doo" through its paces...all I can say is WOW!
Enjoy!

Doc Zoom

http://www.c3powersports.com
http://www.powderlites.com
http://www.carbonsled.com

 

[Scott]

Can't wait to hear what it weighs....or did I miss that?

 

[summit-x]

doc that is awsome. u out did yourself again with another amazing sled!

 

[rev*baron]

Nice job! Only negative I can see is the lower a-arms being out of carbon. Unless you wrapped them over aluminum they WILL break from getting a nick in them. Carbon is strong and I love it... but any deep scratch will make you wish you had a titanium arm instead. I don't think the upper arm will be an issue.

Be sweet to see this sled line up against the one Lynn Felker just built for a guy here in CO with the same turbo and clutch setup. Lynn put in a dropped and rolled billet chaincase to fit a 3" paddle track under it on a Holz skid. Was fun watching him build it and can't wait to see it on the snow.

Once again....great job seeing you're next gen class sled!

 

[Doc Zoom]

The sled works awesome! I want to run a narrower ski stance so we are going to try the new Alternative Impact Titanium 39" A-Arms. I'll post some pics when they come in and we swap them out.
http://alternativeimpact.com/

I'm working with Peter at Snowmobile Detailing to redo the side graphics, its too busy and we do need to show more skin (Carbon) if you know what I mean, kinda like bib overalls on a supermodel!
The sled is at the Helena Boat and Powersports show this weekend if you want to stop by and see it.
Doc

 

[PowderProject]

Super Sick guys I would love to check it out someday

 

[summit-x]

would love to see this thing in action sometime.

 

[mountainhorse]

Wholey Moley!!

That thing shows more attention to detail than any sled I've seen to date.

Kudos to you guys for pulling that beauty off!!

 

[Doc Zoom]

Oh where o where to ride! Its tough living in Montana and trying to find hills that challenge this hot rod. Wanting to go to Cooke this weekend but the weather isn't looking so good, same in Bozeman, no snow in Lincoln....aarrg.
Anyone have any ideas? Can't wait to try out the new titanium arms from Alternative Impact!
Doc

 

[SLY]

You have reached the limit of your Paid Premium Member reading privileges. To continue reading this thread, please keep threads under 75 posts.

 

[fourthmeal]

I would give my left nut to ride that thing for a day.

Married, huh? Easy to barter with items that are sitting on the shelf.

 

[summit-x]

Oh where o where to ride! Its tough living in Montana and trying to find hills that challenge this hot rod. Wanting to go to Cooke this weekend but the weather isn't looking so good, same in Bozeman, no snow in Lincoln....aarrg.
Anyone have any ideas? Can't wait to try out the new titanium arms from Alternative Impact!
Doc

go to yellowstone, a couple buddies were there last weekend said it wasnt to bad, were making a trip to cooke city in march doc, if your around u and quay should come down there it should be a good time.

 

[IRONMAN]

Married, huh? Easy to barter with items that are sitting on the shelf.

LMAO!! Thats funny rite there^^^^^^^^^^^^^^^^^

 

[Doc Zoom]

That was good, my wife was wondering why I was laughing....nothin' honey!

 

[Doc Zoom]

"Ultimate Ski Doo" update:
Installed the new Alternative Impact titanium arms, man are these nice!
Super light and strong to boot! Also installed carbon fiber handlebars from Fly Racing. Q-Dog finally got a chance to put the sled through the paces and was slaying chutes in Cooke City in no time! I think he's in love! It's amazing how effortless it is to climb with this sled, between being so light and the huge power the Powderlite turbo makes coupled with the 174 inch track and the Nextech skid keeping the front end in check! Everyone that rode the sled commented how smooth and torquey it was, not to mention LIGHT!
Q-Dog now has his sights on Monster at the Big Iron Shoot Out.
I can't say enough about this sled...IT ROCKS!
Give the guys at C3 a call and have them build you one!
This is the FUTURE!

http://www.flyracing.com
http://www.alternativeimpact.com
http://www.c3powersports.com
http://www.carbonsled.com
http://www.powderlites.com

 

[summit-x]

Daang quays getting around prettty good on that,