X
Hey guys, after about 230 hrs my exhaust heat sheild is quite loose. I haven't noticed any vibrations or noises but I do notice a lot of Fiberglas insulation Fibers everywhere under the hood.
I have thought about prying the heat sheild off and wrapping it with header wrap and reinstalling the heat sheild. I also thought that an easier solution might be just to use some sort of silicon to seal up the heat sheild to the pipe at the various openings on the sheild.
Anyone have any suggestions on a silicon that would withstand the high temperatures or any other solutions to the problem? I have some ultra black silicon here but it's only rated for 500 degrees which probably isn't enough.
This has to be a problem other people have had so I'm all ears.
I have thought about prying the heat sheild off and wrapping it with header wrap and reinstalling the heat sheild. I also thought that an easier solution might be just to use some sort of silicon to seal up the heat sheild to the pipe at the various openings on the sheild.
Anyone have any suggestions on a silicon that would withstand the high temperatures or any other solutions to the problem? I have some ultra black silicon here but it's only rated for 500 degrees which probably isn't enough.
This has to be a problem other people have had so I'm all ears.