• Don't miss out on all the fun! Register on our forums to post and have added features! Membership levels include a FREE membership tier.

Gen ii or Wedge Anti Ratchets

SixtySevenGT

Well-known member
Premium Member
Mar 25, 2008
803
116
43
Middleton, Idaho
Looking for a set of 9 tooth 2.52 pitch Gen ii or Wedge Anti Ratchets hopefully on the shaft still.

Edge would work but the shaft would be too short. I can press them but don't like to. If I have to use them out of an edge I will.

PM if you have a set -

Thanks
 

TRS

Life Member
Lifetime Membership
Dec 1, 2007
4,098
6,229
113
67
Cody, WY
Looking for a set of 9 tooth 2.52 pitch Gen ii or Wedge Anti Ratchets hopefully on the shaft still.

Edge would work but the shaft would be too short. I can press them but don't like to. If I have to use them out of an edge I will.

PM if you have a set -

Thanks

Are you looking for stock involuted drivers?
 

SixtySevenGT

Well-known member
Premium Member
Mar 25, 2008
803
116
43
Middleton, Idaho
Extroverts / Anti Ratchets

Extroverts / Anti Ratchets

The kind that stick thru the track and grab the clips

Got lots of the regular kind
 

SixtySevenGT

Well-known member
Premium Member
Mar 25, 2008
803
116
43
Middleton, Idaho
Are you looking for stock involuted drivers?

Just looked up Involuted -- So I guess so

I just installed new 9 tooth Involute/Extrovert double drivers
 

wrtmani

Well-known member
Lifetime Membership
Nov 26, 2007
645
131
43
Kalispell, Mt
Wedge/Gen II shafts are 1" hex...Wahl Brothers lists it's Extrovert/Antiratchet drivers for Edge shafts at 1-1/16" to 1-1/8" hex with different part #'s, best to go with the correct 1" drivers...
 

SixtySevenGT

Well-known member
Premium Member
Mar 25, 2008
803
116
43
Middleton, Idaho
Wedge vs Edge

Biggest issue with Edge shaft is it is too short.

Wedge and Gen ii had a wider tunnel

1 ,1 1/16 1, 1/18 shaft makes no difference -
if it long enough and the drivers press on
 
Premium Features