I just purchased a new E module assembly and the hole drilled just below the motor mount in the left casting does not line up with the hole in the tunnel. Has anyone else seen this?
The shape of the casting is different and the hole is 10mm lower than the old e module.
The assembly is 518327567 and was assembled in 2015. The number on the left casting is 518326796.
The tunnel is a 2008 XP Summit X 800R.
(The photo rotated 90d counter clockwise)
The shape of the casting is different and the hole is 10mm lower than the old e module.
The assembly is 518327567 and was assembled in 2015. The number on the left casting is 518326796.
The tunnel is a 2008 XP Summit X 800R.
(The photo rotated 90d counter clockwise)
