M MNSledShed Member Premium Member Nov 19, 2010 145 11 18 Southern Minnesota Nov 21, 2011 #1 Looking to buy a clutch alignment tool for my 06 SB 900? Which one do I need and where is a good place to get them? Thanks!
Looking to buy a clutch alignment tool for my 06 SB 900? Which one do I need and where is a good place to get them? Thanks!
T ttreewalkerr Free Member Feb 21, 2010 276 33 28 Northern Michigan rider. (Trail) Nov 21, 2011 #2 SLP starting line products
turbolover Enduring the heat till Braap Season Staff member Lifetime Membership Jul 4, 2001 4,041 3,062 113 Rigby, Idaho Nov 21, 2011 #3 Starting Line Products here ya go http://slp.cc/catalog.cfm?pageID=detail&catalogID=3&catID=24&productID=208 Call em (208) 529-0244. Tell em what you need and they will hook you up with the right tool.
Starting Line Products here ya go http://slp.cc/catalog.cfm?pageID=detail&catalogID=3&catID=24&productID=208 Call em (208) 529-0244. Tell em what you need and they will hook you up with the right tool.
M MNSledShed Member Premium Member Nov 19, 2010 145 11 18 Southern Minnesota Nov 21, 2011 #4 ok thanks guys! What model are the clutches on a 06 900? So i know which tool to get. Last edited: Nov 21, 2011
Z-Man Well-known member Premium Member Dec 23, 2007 2,588 810 113 Nov 21, 2011 #5 TSS98 if it is stock
Newfusion900 Well-known member Lifetime Membership Oct 13, 2011 433 80 28 34 Blain, Pa Nov 26, 2011 #6 Is it necessary to purchase the more expensive alignment tool from SLP if your clutch is shimmed for the 115 belt, already have one tool and then got the clutch shimmed for the 115. Do I need to purchase the other one?
Is it necessary to purchase the more expensive alignment tool from SLP if your clutch is shimmed for the 115 belt, already have one tool and then got the clutch shimmed for the 115. Do I need to purchase the other one?
05900 Embrace the BRAAAAAAP! Lifetime Membership Nov 27, 2007 10,696 4,560 113 Where the Buffalo roam Nov 26, 2011 #7 Used original tool regardless of shims as it set against face of secondary, don't forget to allow for some "float" on shaft.
Used original tool regardless of shims as it set against face of secondary, don't forget to allow for some "float" on shaft.
Newfusion900 Well-known member Lifetime Membership Oct 13, 2011 433 80 28 34 Blain, Pa Nov 27, 2011 #9 So i can continue to use the tool that I have, wonder what the difference is between it and the one for the 115 belt?
So i can continue to use the tool that I have, wonder what the difference is between it and the one for the 115 belt?