Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Any one out there that has a SLP pipe and can that burn down?
I have a 09 800, all the engine up dates done 200 miles ago, installed the pipe and can as per slp and this last weekend burn down the mag side.
Any input would be helpfull.
could you please elaoborate on that? where did you add/subtract fuel and how much?? it would sure help me. added pc3 with SLP map/exhaust, gained a few rpms on top otherwise it runs worse, terrible dead spot in the mid-range.
Each sled will be different. That is why generic maps don't work on anything. We spent 3 weekends getting SkiBreezes sled dialed in and we noticed 1 major thing.The sled does not compensate for altitude and temp very well. It will run perfect one day and need adjusting the next.
I just lost my 09 800 Dragon Mag side as well. I am all stock and had updates.
Did you notice anything before in went down. Mine was idling low then I had a check engine then it went. Funny part is that I lost my wifes 09 700 RMK Mag side 2 days before that. And yes I do warm my machine up before I ride them. Thank god the 800 is still under warrenty, not so lucky with the 700. I have it torn down and waiting on parts. This seems to still be a problem with Polaris sleds. I hear once this happens it will repeat again. I wonder if anyone has done well after a rebuild and what caused it to happen.
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 -5 -1 0 0 0
0 0 0 0 0 -5 -1 0 0 0
0 0 0 0 0 -5 -8 0 0 0
0 0 0 0 0 -5 -5 5 0 0
0 0 0 0 0 -5 0 0 0 0
0 0 0 0 0 -5 0 0 0 0
0 0 0 0 0 -5 0 0 0 0
0 0 0 0 0 -5 -5 0 0 0
0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 8 0 5 5
0 0 0 0 0 0 8 0 5 5
0 0 0 0 0 0 6 0 5 5
0 0 0 0 0 0 5 3 6 6
0 0 0 0 0 0 12 10 6 -1
0 0 0 0 0 0 12 15 6 -1
0 0 0 0 0 0 12 12 4 -1
0 0 0 0 0 0 2 3 1 -8
0 0 0 0 0 0 12 0 1 -8
0 0 0 0 0 0 12 8 6 -4
0 0 0 0 0 0 7 6 10 1
0 0 0 0 0 0 7 7 12 5
0 0 0 0 0 0 7 7 12 5
0 0 0 0 0 0 7 7 12 5
0 0 0 0 0 0 7 7 12 5
0 0 0 0 0 0 7 7 12 5
I can't figure out how to print the screen. Left to right is throttle position in 10% increments. Top to bottom is 500 rpm to 9500. This is my sled with an slp pipe and is working, it is not the perfect map but we're getting there. You can see that there is a ton of differences from stock.
if i am reading your map correctly, it looks like you are pulling fuel from the mid rpms/midrange. if that is true i would be very careful about doing that.