J
Yes, there are different versions of the 6 bolt clutch. I like to call it 6 bolt instead of 6 tower for some reason. Anyway the earlier ones used the same weights as the 9 bolt without the set screw and with the bushing. Most if not all of the newer 6 bolt clutches use the weight with a setscrew and the larger pivot pin or bolt. I think you can put bushings in the set screw weights and use them in the older clutches, but it is not a good idea to use the older weights in the set screw clutches. It can be done but the weights and the pins will wear too quickly because there would be no bushing. Also they would need some washers to prevent side to side movement. Again, I hope this helps.
I ordered the correct set screw style weights and finally a clutch puller from catdeals. I believe the puller works for 6 and 9 post clutches.
Bought a second hand 9 post clutch locally to hold me over until the parts come in. Bolted it on and rode the Pantera out of the garage last night so I can get the boys Powder Special in for carb maintenance. Backed the Pantera up so I could ride it into my enclosed trailer and when I jammed on the brake it brought up solid. Pantera won't move....%$$#
I guess when the Powder Special is cleaned up I will get the Pantera back in so I can take the darn caliper apart to clean it up.....I guess 8 years of not riding it does this