162x2.25 Camo Challenger on 04 Escape

[Perk]

I am thinking about selling my Camo Challenger 162 x 15 x 2.25 to a friend with an 04 Escape. What will I need to do to get it on his sled?

I am thinking if the pitch on the drivers is right, all I would have to do is put a big wheel kit on it to take up the extra length. Anyone done this yet?

Thanks for your help

 

[Desperado]

I believed that track is a 3in pitch so your buddy will have to change his drivers to make it work, another thing to consider is tunnel clearance I know on my escape the 2in track looked thats all that would fit. A different option is to buy a drop and roll kit from Holz that should give you clearance to fit the track.

 

[wellfed777]

the challenger is a way better track if you ask me and it will clear i put a 2.5 under my 04 but i d/r it and its a bit of a pain as for the drivers if its a 2.52 pitch then the will work but you probably would want extros cause that track hooks up and will rachet bad if you don't run it tight and then you will have friction issues as for the big wheels not sure i went with mountain machines 8'' but i also moved the skid back an inch or so good luck