900

I'm looking for a 2005 rmk900 slp pipe and can must be clean. Please contact me at ekko.carson@yahoo.com

I own a machine shop we work with all types of materials. in my line of work we constatly strive to come up with new and better ways to do things. the purpose of this thread is to just be a posting board of ideas. what annoys you about the 900 what could be done to fix it? what would be handy to...

Ok guys. I've about got my sled set up all done 05 rmk900 166" all I'm lacking is cosmetics. Does anyone make wraps and/or graphics for the 900's

hey everyone. so i just bought an 05 RMK900 166" 50th anniversary. i know everyone says to run from them but ive found most of those people were the ones who were unwilling to mod their sled. the people that have love them. in fact my buddy hated his because of the weight and he broke the crank...

Hi All, First of all, I have been reading your posts for the last two seasons and thank you! I've learned a ton. That said, my 05 RMK w/ a Carl's 975 kit took a dive last Saturday. I took off the top end and while the pistons/cylinders did not seize, a portion of the lower housing on one...

My 9 started to act up like the drivers were worn, little bit of skipping when it moves, so i checked the drivers and they look perfectly fine. THEN, got back to the truck and it felt like the belt was slipping, rev but no track movement! Belt and clutches bone dry, checked the chaincase, all...

sold

Looking for side panels, hood hinges, knee panels, windshield, etc. for a 2005 Polaris Switchback 900. PM if you have any hood, panel etc parts. Or if you are parting out your sled.

Does anyone have any info about the Union Bay big bore 900 motor? Wanting to upgrade my motor and see there is one on e-bay right now. what info do you have for me?

I am interested in a Union Bay Polaris 900 motor on ebay right now. It says it is a 1135 cc motor. Would this be a good race motor or hill climb motor? Let me know what you think or if you have any info.

My buddy is looking for an aftermarket single pipe to replace an old pipe with cracks and a hole. I think its an SLP or speedworks? His dump or muffler is in great shape. sled is a carbed Arctic cat 900 2004 please call Jim at 253 six 8 six four, zero, six, one

2005 POLARIS 900 TURBO 162" ***$5800.00*** GREAT RUNNING SLED...TURBO PROFESSIONALLY INSTALLED. HAS UPDATED CLUTCH, CRANK, BLOCK WITHIN 500 MILES. NEW CAMOPLAST 2.5 EXTREME TRACK LAST YEAR. SINGLE OWNER. 2.5" TRACK. VERY WELL MAINTAINED. RUNS VERY STRONG. $ 5800.00 MAKE OFFER. CALL AL @...

Sold

Harness sold, thanks ding!

I'm not usually one to ask questions that have be answered before that's what the search function is for. But... Before i start: Just bought the sled im new to 900's (know lots about previous gen 800's have 2 of them im not new to fixing sled's that for sure.) 05 rmk 900 Custom cold air by PO...

We went for a ride yesterday, bout hour, hour n a half. Everything ran great. No reverse problems, no cutting out, not even a hiccup. Loaded the sleds, drove bout 4 miles home and now no start. Checked for spark and there is none. Where do I even start to diagnose this. We got fresh snow...

I recently went through the motor on my 2005 rmk 900 new rings, gasket kit, det sensor and water temp sensor. i had the sled all reassembled and it started right up and idled just fine. i had let it idle for about 10 min and i went to open the throttle a ways to rev it up and it revved up a...

Good used PTO crank end from a 900 RMK this is a 30mm pto taper $175shipped in the lower 48 Call or pm me 1-435-245-2411 Thanks.......Steve

anyone have a good crank for a 2005 Polaris 900 or know where i can get bearings pressed on?

SOLD!!! 2005 Polaris RMK 900 IQ -SLP Y pipe, pipe & can -Custom Intake -2010 body & aluminum bumper (to bulk head...very strong) -2010 RMK Pro skis -NEW upgraded Ryde FX shock, front and rear w/ new springs -Pro Taper high rise bars with 4" riser (great for tall guys) -lots of venting...