Torque spec
- Thread starter BCP
- Start date
30 ft/lbs.
T
head bolts?
What about head and cylinder specs,,,,,seeing as were asking.
What about head and cylinder specs,,,,,seeing as were asking.
Cylinders are self torquing (attached to the block)
Head, if I remember right is 18ft/lbs at first and then a final torque at 43ft/lbs.
Remember aftermarket head studs are different than the stock bolts and require different torque specs.
Head, if I remember right is 18ft/lbs at first and then a final torque at 43ft/lbs.
Remember aftermarket head studs are different than the stock bolts and require different torque specs.
Similar threads
