M
My 06 700 seized with 890 miles the other day, I took off the head and the inside of the cylinder was sticky and so was the plug. It looked like to me that the head gasket blew and coolant went into the cylinder and seized it. I cleaned out the cylinders and oiled them, then when I pulled the pull cord the engine seemed to move freely. I still want to replace my rings and possibly clean any coolant out of the crank case. I am having trouble getting the cylinder off because of the injector that is bolted to the back of the motor, this bolt is super hard to get at. Anyone figure out how to undo that bolt?
Thanks in advance
Thanks in advance
Last edited: