Just wondering if anybody is running a 270 at low elevation and if so what does your setup consist of clutching and boost if possible
Mcx 270 at low elevation
- Thread starter Duramax325
- Start date
I run 15 lbs of boost at around 1600' - 2400 on premium 162" camo extreme
Mcx 270 kit with head shim .
Epi black spring in secondary wound 0-1 47 degree helix
Dalton's loaded to 65 g in primary 14.5mm rollers
I also run the same set up to 9000"
Mcx 270 kit with head shim .
Epi black spring in secondary wound 0-1 47 degree helix
Dalton's loaded to 65 g in primary 14.5mm rollers
I also run the same set up to 9000"
Last edited:
B
I am also very new to yamaha explain what 14.5 pins are please
B
That is a setting based on the marks in the secondary and the helix to give spring pre-load/Wind.
BC.
B
Thanks that's what I thought but was just making shur
My bad fixed it for you !
