I am installing a 03 edge rmk 144 skid in a 97 rmk 136 and am looking for the measurements to drill the new holes in the tunnel.
thanks in advance for the help
X2, 144 measurements and 151 measurements are different...
I do have the measurements thou
from the front side of the DS to the center of the first hole should be 9 13/16"
and 5 1/8" down center from the front hole to the center of the rear hole is 27 15/16" and 5" down.
they are the same measurements from a 136 skid to the 144 skid, so honestly if you took out a 136 skid you should be able to bolt the 144 back in.
