C
My 2014 PRO RMK 800 with a non-intercooled aerocharger kit has been running great for the last 2 seasons. This year on my first trip to Togwotee I started to have random bogging issues, seemed more priminent when getting up into higher elevations around 10,000 ft but it would be fine at 8,000 ft. It would bog really bad and sometimes wouldn't have enough power to keep the track spinning and I would have to stop, drop back down to the bottom of a hill and it would run great again.
The other questionable symptom I noticed is the 8th LED (blue) on the aero-commander controller was blinking while the sled was at idle? I thought this light only came on when boost was detected? I'm thinking if it detecting boost and adding fuel at idle that could be part of my issue? I assume the controller uses the MAP sensor that came with the kit to detect boost and activate the 8th LED?
Any help on what could be the cause or insight on how the controller is supposed to work would be greatly appreciated!
The other questionable symptom I noticed is the 8th LED (blue) on the aero-commander controller was blinking while the sled was at idle? I thought this light only came on when boost was detected? I'm thinking if it detecting boost and adding fuel at idle that could be part of my issue? I assume the controller uses the MAP sensor that came with the kit to detect boost and activate the 8th LED?
Any help on what could be the cause or insight on how the controller is supposed to work would be greatly appreciated!