925 gearing
- Thread starter whitemeat
- Start date
F
2.33 belt drive in my Linderman 925cc with full jaws. Stock secondary. Heavy hitter weights and 911 billet cover and spider
What year of sled. Mine also is a linderman 925.
F
2013 with 8 tooth drivers and 2.5" camo extreme. Going to be doing the mountain cat drop and roll with the 3" PC soon.
2017 920, 2.52 tki, has been perfect, running 79 gram mds weights and steve's spring, 41/37 helix stock spring, absolute perfect setup to 10k. Recommend running the 911 cover on the new clutch too, wore last team out at 700 miles, towers were flexing bad, wore slides on one side really bad, wore bushing out and snapped steal spider. I have 500 on new clutch with 911 and everything looks like new. Running a 162 2.8 track
Last edited:
S
Loved the 22/48 gears, way more track speed , held rpm's on a long good climb in 2 ft of fairly heavy snow, backshift could be a wee bit better, will adjust, but clutch and belt heat seemed not really higher than normal. Bottom end is still fine, gotta get an adjustable suspension block of some sort, skis are carrying way to high. But very happy with the gear change.
