F
Anyone out there put a 3" lug camo-extreme in 2012 proclimb? Just wondering if there is adequate clearance to the cooler and other things, or if drivers need to be downsized. Thanx in advance! Forrest.
3" lug camo-extreme in a proclimb?
- Thread starter **forrest**
- Start date
Should bolt right in. Might have to trim a little on the tip edges for the tapered tunnel.
S
We talked bout it quite a bit in other thread. But ya it fits but I recommend 7t avid drivers for helping with clearing out snow in the front. Pretty tight with the 8s but lotsa ppl still runnin em with it
F
My TM1000 runs the 174 x 3" on stock drivers....never had an issue what so ever.
My 2013 M8 LE PC is running the 162 x 3" on stock drivers and not an issue at all.
The one thing about stock drivers vs the Avids is the stock drivers seem to run alot smoother with less vibration. I have had 2 different sleds with Avids and thats just my own experience.
My 2013 M8 LE PC is running the 162 x 3" on stock drivers and not an issue at all.
The one thing about stock drivers vs the Avids is the stock drivers seem to run alot smoother with less vibration. I have had 2 different sleds with Avids and thats just my own experience.
B
have about 20 sleds with 3'' tracks in 2012 and 13 models and even more in the m chassis all stock drivers no issues at all
Did your 156" x 3" bolt right up or did you need bigger wheels or an offset axle ? Just wondering if there's enough adjustment to tighten track sufficiently.
B
bolted right in im almost out of adjustment in the idlers and i ratchets under heavy load and hard acceleration for a second but it should be fine with the adjustment i have left
